WHITE PAPER
The Most Trusted MQTT Platform for loV and Connected Cars →

Use Golang template to customize analaysis result in Kuiper

eKuiper Team
Jul 15, 2020
Use Golang template to customize analaysis result in Kuiper

Introduction

After performing data analysis and processing through Kuiper, users can use various sink to send data analysis result to different systems. For the same analysis results, the format required by different sinks may not be the same. For example, in an Internet of Things scenario, when it is found that the temperature of a device is too high, a request needs to be sent to a rest service in the cloud. At the same time, a control command needs to be sent to the device through the MQTT protocol locally. The data format required by them may not be the same. Therefore, it is necessary to perform "secondary processing" on the results from the analysis before the data is sent to different targets. This article will introduce how to use the data template in the sink to achieve "secondary processing" of the analysis results.

Golang template introduction

The Golang template applies a piece of logic to the data, and then formats and outputs the data according to the logic specified by the user. The common usage scenario of the Golang template is in web development. For example, after converting and controlling a data structure in Golang, it is converted to HTML tags and output to the browser. Kuiper uses Golang template to implement "secondary processing" of the analysis results. Please refer to the following introduction from Golang.

Templates are executed by applying them to a data structure. Annotations in the template refer to elements of the data structure (typically a field of a struct or a key in a map) to control execution and derive values to be displayed. Execution of the template walks the structure and sets the cursor, represented by a period '.' and called "dot", to the value at the current location in the structure as execution proceeds.

The input text for a template is UTF-8-encoded text in any format. "Actions"--data evaluations or control structures--are delimited by "{{" and "}}"; all text outside actions is copied to the output unchanged. Except for raw strings, actions may not span newlines, although comments can.

Actions

The Golang template provides some built-in actions which allows users to write various control statements to extract content. For example,

  • Output different contents according to judgment conditions
{{if pipeline}} T1 {{else}} T0 {{end}}
  • Iterate through the data and process it
{{range pipeline}} T1 {{else}} T0 {{end}}

Readers can see that actions are delimited by {{}}. During the use of Kuiper’s data templates, the output is generally in JSON format, and the JSON format is delimited by {}. Therefore, if the readers are not familiar with it, they will find it difficult to understand the functions of Kuiper's data templates. For example, in the following example,

{{if pipeline}} {"field1": true} {{else}}  {"field1": false} {{end}}

The meaning of the above expression is as follows (please note the delimiter of action and the delimiter of JSON):

  • If the condition pipeline is met, the JSON string {"field1": true} is output
  • Otherwise, the JSON string {"field1": false} is output

Kuiper sink data format

The Golang template can be applied to various data structures, such as maps, slices, channels, etc., and the data type obtained by the data template in Kuiper's sink is fixed, which is a data type that contains Golang map slices. It is shown as follows.

[]map[string]interface{}

Send slice data by piece

The data flowing into the sink is a data structure of map[string]interface{} slice. However, when the user sends data to the target sink, it may need a single piece of data instead of all the data. For example, in this article of Integration of Kuiper and AWS IoT Hub, the sample data generated by the rule is shown below.

[
  {"device_id":"1","t_av":36.25,"t_count":4,"t_max":80,"t_min":10},
  {"device_id":"2","t_av":27,"t_count":4,"t_max":45,"t_min":12}
]

When sending to the sink, each piece of data is sent separately. First, you need to set the sendSingle of the sink to true, and then use the data template: {{json .}}. The complete configuration is as follows, and the user can copy it to the end of a sink configuration.

 ...
 "sendSingle": true,
 "dataTemplate": "{{json .}}"
  • After setting sendSingle to true, Kuiper traverses the []map[string]interface{} data type that has been passed to the sink. For each data in the traversal process, the user-specified data template will be applied.
  • json is a function provided by Kuiper (users can refer to Kuiper Extension Template Function for more information of Kuiper extensions), which can convert incoming parameters into JSON string output. For each piece of traversed data, the content in the map is converted to a JSON string

Golang also provides some built-in functions. Users can refer to More Golang Built-in Functions for more function information.

Data content conversion

Still for the above example, you need to do some conversion on the returned t_av (average temperature). The basic requirement of the conversion is to add different description text according to different average temperatures for processing in the target sink. The rules are as follows,

  • When the temperature is less than 30, the description field is "Current temperature is$t_av, it's normal."
  • When the temperature is greater than 30, the description field is "Current temperature is$t_av, it's high."

Assuming that the target sink still needs JSON data, the content of the data template is as follows:

...
"dataTemplate": "{\"device_id\": {{.device_id}}, \"description\": \"{{if lt .t_av 30.0}}Current temperature is {{.t_av}}, it's normal.\"{{else if ge .t_av 30.0}}Current temperature is {{.t_av}}, it's high.\"{{end}}}"
"sendSingle": true,

In the above data template, the built-in actions of {{if pipeline}} T1 {{else if pipeline}} T0 {{end}} are used, which looks more complicated. We can do a little adjustment, remove the escape and add abbreviation. The typesetting afterwards is as follows (note: when generating Kuiper rules, the following optimized typesetting rules cannot be passed in).

{"device_id": {{.device_id}}, "description": "
  {{if lt .t_av 30.0}}
    Current temperature is {{.t_av}}, it's normal."
  {{else if ge .t_av 30.0}}
    Current temperature is {{.t_av}}, it's high."
  {{end}}
}

Use Golang's built-in binary comparison function:

  • lt:less than
  • ge:greater or equal to

It is worth noting that in the lt and ge functions, the type of the second parameter value should be consistent with the actual data type of the data in the map, otherwise an error will occur. As in the above example, when the temperature is greater than 30, because the type of actual average number in map is float, the value of the second parameter needs to be passed into 30.0, not 30.

In addition, the template is still applied to each record in the slice, so you still need to set the sendSingle attribute to true. Finally, the content generated by the data template for the above data is as follows,

{"device_id": 1, "description": "Current temperature is 36.25, it's high."}
{"device_id": 2, "description": "Current temperature is 27, it's normal."}

Data traversal

By setting the sendSingle property of the sink to true, the slice data passed to the sink can be traversed. Here, we will introduce some more complex examples. For example, for the result of the sink which contains data of the nested array type, how can it realize the traversal by the traversal function provided in the data template.

Assuming that the data content flowing into the sink is as follows:

{"device_id":"1", 
 "values": [
  {"temperature": 10.5},
  {"temperature": 20.3},
  {"temperature": 30.3}
 ]
}

The requirement is:

  • When a value of temperature in the "values" array is found to be less than or equal to 25, add an attribute named description and set its value to fine.
  • When a value of temperature in the "values" array is found to be greater than 25, add an attribute named description and set its value to high.
"sendSingle": true,
"dataTemplate": "{{$len := len .values}} {{$loopsize := add $len -1}} {\"device_id\": \"{{.device_id}}\", \"description\": [{{range $index, $ele := .values}} {{if le .temperature 25.0}}\"fine\"{{else if gt .temperature 25.0}}\"high\"{{end}} {{if eq $loopsize $index}}]{{else}},{{end}}{{end}}}"

The data template is relatively complicated, which is explained below:

  • {{$len := len .values}} {{$loopsize := add $len -1}}, this section executes two expressions. For the first one, len function gets the length of values in the data. For the second one, add decrements its value by 1 and assigns it to the variable loopsize. At present, since the operation of directly decrementing the value by 1 is not supported by the Golang expression, add is a function extended by Kuiper to achieve this function.

  • {\"device_id\": \"{{.device_id}}\", \"description\": } This piece of template is applied to the sample data, and a JSON string {"device_id": "1", "description": }is generated.

  • {{range $index, $ele := .values}} {{if le .temperature 25.0}}\"fine\"{{else if gt .temperature 25.0}}\"high\"{{end}} {{if eq $loopsize $index}}]{{else}},{{end}}{{end}} ,this section of the template looks relatively complicated. However, if we adjust it, remove the escape and add indentation, the typesetting is as follows which may be clearer (note: when generating the Kuiper rules, the following optimized typesetting rules cannot be passed in).

    {{range $index, $ele := .values}} 
      {{if le .temperature 25.0}}
        "fine"
      {{else if gt .temperature 25.0}}
        "high"
      {{end}} 
      {{if eq $loopsize $index}}
        ]
      {{else}}
        ,
      {{end}}
    {{end}}
    

    The first condition judges whether to generate fine or high; the second condition judges whether to generate , to separate the array or ] at the end of the array.

In addition, the template is still applied to each record in the slice. Therefore, we still need to set the sendSingle attribute to true. Finally, the content generated by the data template for the above data is as follows:

  {"device_id": "1", "description": [ "fine" , "fine" , "high" ]}

Summary

The data template function provided by Kuiper can realize the secondary processing of the analysis results to meet the needs of different sink targets. However, readers can also see that due to the limitations of the Golang template, it is awkward to implement more complex data conversion. We hope that the Golang template function can be made more powerful and flexible in the future, which can support more complex requirements. At present, it is recommended that users can implement some simpler data conversion through data templates. If the user needs to perform more complicated processing on the data and extends the sink by himself, it can be directly processed in the sink implementation.

In addition, the Kuiper team plans to support custom extended template functions in sinks in the future, so that some more complex logic can be implemented within the function. For the users, they only need a call of a simple template function.

Related Posts